# How to get free Claude Code by connecting a third-party LLM API without a credit card

How to set up free Claude Code through a third-party LLM API without a credit card: connecting the endpoint, picking a model and testing a request.

Source: https://mextop-3h.top/how-to-get-free/ · based on the channel [bumtastik](https://www.youtube.com/channel/UCtwp0s98eROu6AjgmD2BvtA) · 2026-11-08

## Key takeaways

- The method connects Claude Code to a third-party LLM API instead of an official Anthropic subscription.
- No credit card is required for the setup shown in the walkthrough.
- Model selection (including the one billed as Opus 5.5) depends on what the provider lists as available for your account.
- This does not activate a Claude Pro plan; API access and a Pro membership are separate products.
- Test the connection with a small coding task before starting a larger project.

You can run Claude Code for free by pointing it at a third-party LLM API endpoint rather than paying Anthropic per token, and the walkthrough published by the bumtastik channel shows the whole configuration without a credit card. The full setup guide sits behind a short unlock page at [the Claude plugin unlimited guide](https://rekonise.com/claude-plugin-unlimited-lgt6e), which opens after three support steps on the video. Everything below explains what that method actually does, how to wire it up, and where it tends to break.

## What free Claude Code actually means

Free Claude Code in this context is the Claude Code command-line tool talking to an API that is not billed through your own Anthropic account. Claude Code itself is a terminal-based coding agent: you describe a task in plain language, it reads files in your project, proposes edits, runs commands and iterates. Normally every request is metered against an Anthropic API key or a Claude subscription plan. The workaround replaces the endpoint and the key with credentials from a third-party provider that advertises free or unmetered access to Claude-family models.

That distinction matters. Nothing in the setup creates an Anthropic account, grants a Claude Pro plan, or unlocks Anthropic's own rate limits. You are borrowing someone else's infrastructure arrangement, and your mileage depends entirely on that provider's uptime, quotas and model list. The practical benefit is that you can evaluate whether an agentic coding workflow fits your habits before committing money to it.



## Step-by-step setup of the free connection

The setup is a configuration job, not an installation marathon, and it follows the same order every time.

1. Open the unlock page linked in the video description and complete the three support steps (subscribe, like, comment) to reveal the written guide.
2. Create an account with the third-party provider named in the guide and copy the API key it issues for you.
3. Point Claude Code at that provider's base URL. Depending on your version, this is done through the environment variables Claude Code reads for its API base and authentication token, or through the equivalent settings file.
4. Paste the key as the authentication value and save the configuration.
5. Restart the terminal session so the new environment is picked up.
6. Select the model the guide specifies, using the model name exactly as the provider lists it — a typo here is the single most common cause of a failed first request.
7. Send a small request to confirm the pipe works before you open a real repository.

Keep the guide open beside the terminal and pause at each step. If you are on Windows, remember that environment variables set in one shell window do not carry over to another, and on macOS or Linux you may need to add the export lines to your shell profile so they survive a reboot.

## Testing the connection with a real coding task

A connection that returns a greeting is not proof that the agent can edit code, so validate it with something small and verifiable. Create an empty folder, ask Claude Code to scaffold a single file — a function that reverses a string, a script that renames files by extension, a tiny unit test — and watch whether it reads the directory, writes the file and reports back. Then ask a follow-up that depends on the previous step, such as adding input validation to the function it just wrote. Multi-turn context is where misconfigured endpoints usually fail: the first request succeeds because it is stateless, and the second one errors out.

Once that passes, try a task on an actual project: ask it to explain an unfamiliar file, draft a function from a docstring, or investigate a stack trace you paste in. Keep requests narrow at first. A free third-party endpoint is rarely as fast or as generous as a paid Anthropic key, so long agentic loops that touch dozens of files may time out or hit a quota wall mid-edit.

## Model availability and the Opus question

Model names in this space are fluid, and the guide's model picker reflects whatever the provider exposes at the time of recording. If you are chasing free access to a specific high-end model, check the provider's own model list for your account before assuming it is included: availability can differ between new accounts, regions and free tiers, and a model that appears in a dropdown may still be rate-limited or withdrawn without notice.

Treat any claim of unlimited usage as marketing shorthand. Providers that offer free inference almost always attach fair-use clauses, concurrency caps or daily request ceilings, and they can change them at any time. Read the terms on the provider's site rather than relying on the video, and never hand over credentials you did not create yourself.

## Common problems and how to fix them

Connection errors after setup almost always trace back to one of four causes. An invalid or expired API key produces authentication failures — regenerate the key and paste it again, watching for trailing spaces. A wrong base URL, or one missing a path segment, produces 404 responses; compare it character by character with the provider's documentation. A model name that the provider does not serve for your account produces a model-not-found error, so switch to one listed in your dashboard. And a firewall, VPN or corporate proxy can block outbound requests entirely, which shows up as a timeout rather than an error message.

When you ask for help, post the exact error text, the step you were on and your operating system. Screenshots should have API keys and account details masked. "It doesn't work" gives nobody anything to debug, and a key pasted into a public comment thread is a key you should consider burned.

## Is this legitimate and what are the risks

This method relies on a third-party service and is not affiliated with Anthropic or with the provider, and it does not distribute shared or stolen accounts. The real risks are ordinary ones: free tiers disappear, providers log your prompts and code, and an endpoint you do not control can change behaviour between sessions. Never send proprietary source code, credentials, customer data or anything under NDA through an API you have not vetted. If your work involves sensitive repositories, a paid plan with a clear data policy is the safer route, and the free setup is best treated as a trial environment for learning the tool.

## All links from the video

- Setup guide unlock page: https://rekonise.com/claude-plugin-unlimited-lgt6e
- Channel on Twitter: https://twitter.com/thebumtastik
- Patreon: https://www.patreon.com/bumtastik
- Discord community: https://discord.gg/6EVebQt3bK

## Final thoughts on running Claude Code for free

Free Claude Code through a third-party API is a legitimate way to learn an agentic coding tool before spending on tokens, provided you understand that you are renting access rather than owning a subscription. The setup takes minutes: create the provider account, set the base URL and key, choose a listed model, then prove it works with a two-step coding task. The bumtastik breakdown walks through that sequence at a deliberately slow pace, which is exactly what a first-time configuration needs. Start with the [complete setup guide](https://rekonise.com/claude-plugin-unlimited-lgt6e), keep test projects non-sensitive, and move to a paid plan once the workflow earns its place in your daily routine.

## Questions & answers

**Can I use Claude Code for free without a credit card?**

Yes, the method shown connects Claude Code to a third-party provider that issues an API key without card verification, so no payment details are entered for the setup itself. Follow the configuration steps exactly, then test with a small task before opening a real project. Availability and quotas are set by that provider, not by Anthropic.

**Is Claude Opus 5.5 included for free with this setup?**

Only if the provider lists that model as available for your account at the moment you configure it. The walkthrough shows the model selection and settings used during the demonstration, but free tiers and model lists change frequently. Check the provider's dashboard before assuming a specific high-end model is included.

**Does this give me a free Claude Pro subscription?**

No. The guide covers third-party API access for the Claude Code tool, which is a separate product from a Claude Pro membership. You will not get Anthropic's own web interface, usage limits or billing relationship through this method. A working API connection and a Pro plan are unrelated things.

**What should I do if the connection fails after setup?**

Check four things in order: regenerate the API key and re-paste it without stray spaces, verify the base URL against the provider's documentation, confirm the model name is served for your account, and rule out a VPN or firewall blocking outbound requests. Post the exact error message and the step you were on when asking for help.
